ZyXEL Communications ZyXEL Dimension ES-4024 - Manual (Page 253)

ES-4024A User’s Guide
252 Chapter 39 IEEE 802.1Q Tagged VLAN Commands
where
This command deletes the specified VLAN ID entry from the static VLAN table. The
following example deletes entry 2 in the static VLAN table.
Figure 171 no vlan Command Example
39.6 Enable VLAN
Syntax:
vlan
This command enables the specified VLAN ID in the SVLAN (Static VLAN) table.
39.7 Disable VLAN
Syntax:
vlan
inactive
This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.
39.8 Show VLAN Setting
Syntax:
show vlan
This command shows the IEEE 802.1Q Tagged SVLAN (Static VLAN) table.
An example is shown next.
• For the AdCtl section of the last column, “-“ is a port set to normal, “x” is a forbidden
port and “F” is a fixed port.
• For the TagCtl section of the last column, “T“ is a tagged port, “U” is an untagged port.
= The VLAN ID [1 – 4094].
ras (config)# no vlan 2