ZyXEL Communications ZyXEL Dimension ES-4024 - Manual (Page 211)

ES-4024A User’s Guide
210 Chapter 37 Introducing the Commands
no logging Disables syslog logging.
ping Sends Ping request to an Ethernet
device.
reload Restarts the system.
show
bandwidth-control Displays bandwidth control settings.
broadcast-storm-
control
Displays broadcast storm control settings.
classifier Displays all classifier related information.
[name] Displays the specified classifier related
information.
cluster Displays cluster management status.
candidates Displays cluster candidate information.
member Displays the MAC address of the cluster
member(s).
member mac
addr>
Displays the status of the cluster
member(s).
members config Displays the configuration of the cluster
member(s).
dhcp relay Displays DHCP relay settings.
server Displays DHCP server settings.
server Displays DHCP server settings in a
specified VLAN.
diffserv Displays general DiffServ settings.
filter Displays filter settings.
garp Displays GARP information.
hardware-monitor Displays current hardware monitor
information with the specified temperature
unit (Celsius C or Fahrenheit F).
interface
number>
Displays current interface status.
interfaces config Displays current interface configuration.
egress Displays outgoing port information.
broadcast-
storm-control
Displays broadcast storm control settings.
port-access-
authentication
Displays port authentication settings.
port-security Displays port MAC address learning
settings.
spanning-tree Displays STP settings on the port.
Table 83 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION