ZyXEL Communications ZyXEL Dimension ES-4024 User Manual
Page 67
ES-4024A User’s Guide
66
Chapter 6 System Status and Port Statistics
Rx KB/s
This field shows the number of kilobytes per second received on this port.
Up Time
This field shows the total amount of time the connection has been up.
Tx Packet
The following fields display detailed information about packets transmitted.
TX
This field shows the number of good packets (unicast, multicast and broadcast)
transmitted.
Multicast
This field shows the number of good multicast packets transmitted.
Broadcast
This field shows the number of good broadcast packets transmitted.
Pause
This field shows the number of 802.3x Pause packets transmitted.
Tagged
This field shows the number of packets with VLAN tags transmitted.
Rx Packet
The following fields display detailed information about packets received.
RX
This field shows the number of good packets (unicast, multicast and broadcast)
received.
64
This field shows the number of packets (including bad packets) received that were 64
octets in length.
65-127
This field shows the number of packets (including bad packets) received that were
between 65 and 127 octets in length.
128-255
This field shows the number of packets (including bad packets) received that were
between 128 and 255 octets in length.
256-511
This field shows the number of packets (including bad packets) received that were
between 256 and 511 octets in length.
512-1023
This field shows the number of packets (including bad packets) received that were
between 512 and 1023 octets in length.
1024-1518
This field shows the number of packets (including bad packets) received that were
between 1024 and 1518 octets in length.
>1518
This field shows the number of packets (including bad packets) transmitted that were
greater than 1518 octets in length.
Multicast
This field shows the number of good multicast packets received.
Broadcast
This field shows the number of good broadcast packets received.
Pause
This field shows the number of 802.3x Pause packets received.
Tagged
This field shows the number of packets with VLAN tags received.
Control
This field shows the number of control packets received (including those with CRC
error) but it does not include the 802.3x Pause packets.
TX Collision
The following fields display information on collisions while transmitting.
Single
This is a count of successfully transmitted packets for which transmission is inhibited
by exactly one collision.
Multiple
This is a count of successfully transmitted packets for which transmission was inhibited
by more than one collision.
Excessive
This is a count of packets for which transmission failed due to excessive collisions.
Excessive collision is defined as the number of maximum collisions before the
retransmission count is reset.
Table 7 Status: Port Details (continued)
LABEL
DESCRIPTION