ZyXEL Communications ZyXEL Dimension ES-4024 - Manual (Page 217)

ES-4024A User’s Guide
216 Chapter 37 Introducing the Commands
mode zynos Changes the CLI mode to the
ZyNOS format.
no bandwidth-control Disable bandwidth control on
the switch.
broadcast-storm-
control
Disables broadcast storm
control on the switch.
classifier Disables the classifier. Each
classifier has one rule.
If you disable a classifier you
cannot use rule related
information.
inactive Enables a classifier.
cluster Disables cluster management
on the switch.
member
address>
Removes the cluster member.
dhcp relay Disables DHCP relay.
server Disables DHCP server settings.
server default-
gateway
Disables DHCP server default
gateway settings.
server primary-
dns
Disables DHCP primary DNS
server settings.
server secondary-
gateway
Disables DHCP server
secondary gateway settings.
diffserv Disables the DiffServ settings.
filter classifier Disables filtering (traffic
blocking) for a classifier.
inactive Enables filtering (traffic
blocking) for a classifier.
igmp-snooping Disables IGMP snooping.
ip route Removes a specified IP static
route.
inactive Enables a specified IP static
route.
lacp Disables the link aggregation
control protocol (dynamic
trunking) on the switch.
logins Disables login access to the
specified name.
mac-forward name mac
vlan
interface
Removes the specified MAC
forwarding entry, belonging to a
VLAN group (if any) forwarded
through an interface(s).
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION