ZyXEL Communications ZyXEL Dimension ES-4024 - Manual (Page 223)

ES-4024A User’s Guide
222 Chapter 37 Introducing the Commands
trap-destination Sets the IP addresses of up to
four stations to send your
SNMP traps to.
spanning-tree Enables STP on the switch.
hello-time <1-10> maximum-age <6 ..
40> forward-delay
<4 .. 30>
Sets Hello Time.
help Displays help information.
priority <0-61440> Sets the bridge priority of the
switch.
Note: The priority value
MUST be a multiple
of 4096.
broadcast
storm-control
Enables broadcast storm
control on the switch.
direction
| outgoing>
Sets the direction of the traffic.
monitor-interval
<64 | 1024 | 8000 |
256000>
Sets the monitoring interval (in
microseconds).
time Sets the time in hour, minute
and second format.
date
year>
Sets the date in year, month
and day format.
help Displays help information.
timezone <-
1200|...|1200>
Selects the time difference
between UTC (formerly known
as GMT) and your time zone.
timesync Sets the time server protocol.
server Sets the IP address of your time
server.
trunk Activates a trunk group.
lacp Enables LACP for a trunk
group.
end-port
Sets the last port in the
specified trunk group.
interface
list> timeout
timeout>
Defines the port number and
LACP timeout period.
vlan <1-4094> Enters the VLAN configuration
mode. See Section 37.9.6 on
page 226 for more information.
vlan-type <802.1q|port-based> Specifies the VLAN type.
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION