ZyXEL Communications ZyXEL Dimension ES-4024 - Manual (Page 225)

ES-4024A User’s Guide
224 Chapter 37 Introducing the Commands
ingress-check Enables the device to discard
incoming frames for VLANs that
are not included in a port
member set.
name
string>
Sets a name for the port(s).
Enter a descriptive name (up to
nine printable ASCII
characters).
no egress set
list>
Disables port-based VLAN
settings.
exit Exit from the no commands.
flow-control Disables flow control on the
port(s).
gvrp Disable GVRP on the port(s).
inactive Enables the port(s) on the
switch.
ingress-check Disables ingress checking on
the port(s).
port-access-
authenticator
Disables port authentication on
the port.
port-access-
authenticator
reauthenticate
Disables port reauthenticateion.
port-security Disables port MAC address
learning settings on the port.
port-security
learn inactive
Enables port MAC address
learning settings on the port.
spanning-tree Disables STP on the port.
vlan-trunking Disables VLAN trunking on the
port(s).
port-access-
authentictor
Enables port authentication on
the port.
reauthenticate Enables requthentication on the
port.
reauth-period auth-period> Sets the reauthentication period
on the port.
port-security Enables port MAC address
learning.
learn inactive Disables port MAC address
learning.
address-limit Sets number of MAC addresses
a port can learn.
pvid <1-4094> The default PVID is VLAN 1 for
all ports. Sets a PVID in the
range 1 to 4094 for the specified
interface.
Table 85 interface port-channel Commands (continued)
COMMAND DESCRIPTION