ZyXEL Communications ZyXEL Dimension ES-4024 - Manual (Page 213)

ES-4024A User’s Guide
212 Chapter 37 Introducing the Commands
37.9.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
ospf virtual-
link
Displays OSPF virtual link settings.
vrrp Displays VRRP settings.
running-config Displays current operating configuration.
service-control Displays service control settings.
snmp-server Displays SNMP settings.
spanning-tree config Displays Spanning Tree Protocol (STP)
settings.
system-information Displays general system information.
time Displays current system time and date.
timesync Displays time server information.
trunk Displays link aggregation information.
vlan Displays the status of all VLANs.
Displays the status of the specified VLAN.
vlan1q gvrp Displays GVRP settings.
port-isolation Displays port isolation settings.
traceroute
[ttl <1-255>] [wait
<1-60>] [queries <1-
10>]
Determines the path a packet takes to a
device.
help Displays command information.
write memory Saves current configuration to the
configuration file the switch is currently
using.
Table 83 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
Table 84 Command Summary: Configuration Mode
COMMAND DESCRIPTION
admin-password Changes the administrator
password.
bandwidth-
control
classifier
maximal-bandwidth
Enables bandwidth control for a
traffic flow.
inactive Disables bandwidth control for a
traffic flow.
broadcast-
storm-control
Enables broadcast storm
control on the switch.