ZyXEL Communications ZyXEL Dimension ES-4024 - Manual (Page 219)

ES-4024A User’s Guide
218 Chapter 37 Introducing the Commands
snmp-server trap-destination Disables sending of SNMP
traps to a station.
spanning-tree Disables STP.
timesync Disables timeserver settings.
trunk Disables the specified trunk
group.
lacp Disables LACP in the trunk
groups.
vlan Deletes the static VLAN entry.
vlan1q gvrp Disables GVRP on the switch.
port-isolation Disables port isolation.
password Change the password for
Enable mode.
port-access-
authenticator
Enables 802.1x authentication
on the switch.
queue level <0-7> priority
<0-3>
Sets the priority level-to-
physical queue mapping.
radius-server host [acct-port
]
[key ]
Sets the IP address of the
external RADIUS server, UDP
port and shared key.
remote-
management
Enables a remote management
setting.
start-addr
end-addr
service
icmp|snmp>
Specifies a group of trusted
computer(s) from which an
administrator may use a service
to manage the switch.
router dvmrp Enables and enters the DVMRP
configuration mode.
exit Leaves the DVMRP
configuration mode.
threshold
value>
Sets the DVMRP threshold
value.
igmp Enables and enters the IGMP
configuration mode.
exit Leaves the IGMP configuration
mode.
ospf Enables and enters the OSPF
configuration mode.
area Enables and sets the area ID.
area
authentication
Enables simple authentication
for the area.
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION