6 config-vlan commands, Table 86 interface route-domain commands, Section 37.9.6 on – ZyXEL Communications ZyXEL Dimension ES-4024 User Manual
Page 227

ES-4024A User’s Guide
226
Chapter 37 Introducing the Commands
Use these commands to configure the IP routing domains.
37.9.6 config-vlan Commands
The following table lists the
vlan
commands in configuration mode.
Table 86 interface route-domain Commands
COMMAND
DESCRIPTION
interface
route-domain
Enables a routing domain for configuration.
exit
Exits from the interface routing-domain
command mode.
ip dvmrp
Enables this function to permit VLAN groups
beyond the local switch.
igmp
Enables IGMP in this routing domain.
ospf authentication-
key
Enables OSPF authentication in this routing
domain and sets the security key.
ospf authentication-
same-as-area
Sets the same OSPF authentication settings in
the routing domain as the associated area.
ospf cost <1-65535>
Sets the OSPF cost in this routing domain.
ospf message-digest-
key
Sets the OSPF authentication key in this
routing domain.
rip direction
Both|None> version Sets the RIP direction and version in this routing domain. vrrp authentication- key Sets the VRRP authentication key in the routing domain. no ip dvmrp Disables DVMRP in this routing domain. ip igmp Disables IP IGMP in this routing domain. ip ospf authentication-key Disables OSPF authentication key settings in this routing domain. ip ospf authentication- same-as-area Sets the routing domain not to use the same OSPF authentication settings as the area. ip ospf cost Disables the OSPF cost in the routing domain. ip ospf message- digest-key Sets the routing domain not to use a security key in OSPF. ip vrrp authentication-key Resets the VRRP authentication settings.