Xerox ALLY PLUSTM 6287 - Manual (Page 93)

TRANSLATE TABLES
General Information
The data stream from the coax host or alternate host is not sent directly
through the ALLY PLUS to the attached printer. Rather, all characters must
first pass through the appropriate character code translation table, even if
the printer uses the same data format as the source device. If the source and
printer formats are the same, the data is routed through a pass-through table
(ASCII from ASCII).
If the data formats of the two devices are different, a translation table is
selected that will convert the data from one format to another. The most
basic function of the ALLY PLUS is to convert EBCDIC (or host) data to
ASCII data one byte at a time. Each translate table has 256 entries
numbered 00 to FF. When a character is received by the ALLY PLUS, the
corresponding character from the appropriate translate table is substituted,
and that value is sent to the printer.
The ALLY PLUS has ten translate tables that can be modified by the user.
The tables are listed here with their table access number or letter:
# Description
0 ASCII from ASCII
2 ASCII from DSC
4 ASCII from SCS
6 EBCDIC from ASCII
8 EBCDIC from DSC
A EBCDIC from SCS
C ASCII from DSC APL
E ASCII from SCS APL
G EBCDIC from DSC APL
I EBCDIC from SCS APL
SECTION 5