Xerox ALLY PLUSTM 6287 - Manual (Page 131)

Page 11-5 6287 ULTRA COMPATIBILITY
11 — APL Output
APL is used in conjunction with EAB. As such, this option, in conjunction
with ULTRA Option #20, will define the value of ALLY PLUS Option #50.
A value of “N” is executed as though it were an ALLY PLUS value of 00
or 01, and a value of “Y” is executed as an ALLY PLUS value of 02 or 03,
depending upon the setting of ULTRA Option #20. The General
Configuration Report will display “0=2k,” “1=4k,” “2=2kEAB” or
“3=4kEAB.”
12 — Reserved
This option is reserved in the current ULTRA firmware, and it has no
equivalent in the ALLY PLUS.
13 — Reserved
This option is reserved in the current ULTRA firmware, and it has no
equivalent in the ALLY PLUS.
14 — Reserved
This option is reserved in the current ULTRA firmware, and it has no
equivalent in the ALLY PLUS.
15 — Bold Print Emulation
The equivalent ALLY PLUS option is Option #70. A value of “A” or “B” is
executed as though it were an ALLY PLUS value of 01, and a value of “C”
is executed as an ALLY PLUS value of 00. The General Configuration
Report will display “yes” or “no.”
16 — Reserved
This option is reserved in the current ULTRA firmware, and it has no
equivalent in the ALLY PLUS.
17 — Reserved
This option is reserved in the current ULTRA firmware, and it has no
equivalent in the ALLY PLUS.