43 (49) — word length (data bits), 44 (4a) — stop bits, 45 (4b) — flow control (handshaking) – Xerox ALLY PLUSTM 6287 User Manual

Page 57

Page 3-17

CONFIGURATION

43 (49) — Word length (data bits)

The serial port word length may be set for 5, 6, 7 or 8 bits. The default is 8

bits. Use the following values to program this option:

!ALLY!43=05;

5 bit word length

!ALLY!43=06;

6 bit word length

!ALLY!43=07;

7 bit word length

!ALLY!43=08;

8 bit word length (default)

44 (4A) — Stop bits

The default number of stop bits for the serial ports is 1. To program this

option:

!ALLY!44=00;

no stop bits

!ALLY!44=01;

one stop bit (default)

45 (4B) — Flow control (handshaking)

There are two selections for flow control. The ALLY PLUS uses hardware

handshaking by default. This option may be programmed as follows:

!ALLY!45=01;

XON/XOFF (software) handshaking

!ALLY!45=02;

RTS/CTS (hardware) handshaking (default)