Xerox ALLY PLUSTM 6287 - Manual (Page 135)

Page 11-9 6287 ULTRA COMPATIBILITY
37 — Reserved
This option is reserved in the current ULTRA firmware, and it has no
equivalent in the ALLY PLUS.
38 — Reserved
This option is reserved in the current ULTRA firmware, and it has no
equivalent in the ALLY PLUS.
39 — Non-Transparency Trigger 1 Output
This command has no effect in the ALLY PLUS.
40 — Alternate Host Lockout Duration
The setting of this option will determine the settings of all four potential
alternate host ports on the ALLY PLUS (Options 80, 81, 82 and 83). The
ULTRA decimal value is executed as though it were the equivalent ALLY
PLUS hexadecimal value. The General Configuration Report will display
the hexadecimal value.
41 — Serial Alternate Host CTS Enabled
The setting of this option will affect the settings of both ALLY PLUS
Options 45 and 4B. A value of “Y” is executed as though it were an ALLY
PLUS value of 02, and a value of “N” is executed as an ALLY PLUS value
of 01. The General Configuration Report will display either “1=XON/
XOFF” or “2=RTS/CTS.”
42 — Reserved
This option is reserved in the current ULTRA firmware, and it has no
equivalent in the ALLY PLUS.
43 — Reserved
This option is reserved in the current ULTRA firmware, and it has no
equivalent in the ALLY PLUS.
44 — Reserved
This option is reserved in the current ULTRA firmware, and it has no
equivalent in the ALLY PLUS.