Xerox ALLY PLUSTM 6287 - Manual (Page 80)

6287 ALLY PLUS User’s Manual Page 4-6
%13 — Coax Host Finished
A job boundary PFS. When coax host data is no longer being processed,
this PFS is sent to the printer.
%14 — Switch to Parallel Port 1 Host
When switching from any other host (or neutral) to the parallel port 1
(PARALLEL I/O) alternate host, this PFS is sent out.
%15 — Parallel Port 1 Host Finished
After all parallel port 1 (PARALLEL I/O) alternate host data has been
processed, this PFS is sent out.
%16 — Switch to Parallel Port 2 Alternate Host
When switching from any other host (or neutral) to the parallel port 2
(PARALLEL IN) alternate host, this PFS is sent out first.
%17 — Parallel Port 2 Alternate Host Finished
After all parallel port 2 (PARALLEL IN) alternate host data has been
processed, this PFS is sent out.
%18 — Switch to Local Copy
A job boundary PFS. When a Local Copy is requested, this PFS is sent prior
to the screen data being sent.
%19 — Local Copy Finished
A job boundary PFS. After a Local Copy is finished printing, this PFS is
sent to the printer.
%20 — Reserved
This PFS is reserved for future use by AGILE.
%21 — LU1 Begin Bracket
If Option #54 is enabled, this PFS is sent to the printer when a Begin
Bracket indicator is presented by the host. The user should ordinarily define
this PFS with a printer reset command, or with an emulation switching
command for a multimode printer.