Sagem 4450E - Manual (Page 24)

CHAPTER 2
3P@C Installation Manual
Page 2-1 Reproduction and communication in any form prohibited without the written permission of
SAGEM SA
2. 3P@C 4450E Hardware Structure
This chapter describes hardware structure of the 3P@C 4450E, including the whole-equipment
configurations and the description of each service module.
2.1. Shelf Configuration
2.1.1. Structure of the General Chassis
The general chassis of 3P@C 4450E is called 3P@C 4450E-IPDSLAM-10U general chassis kit. It
contains a 10U chassis, a backplane, a fan module, a fan mounting support and an air deflector frame.
Its outside view is shown in Figure 2-1.
Figure 2-1 General chassis of 3P@C 4450E
10U chassis
Fan module
Air deflector
frame
The general chassis composition of 3P@C 4450E is described in Table 2-1:
Table 2-1 General chassis composition of 3P@C 4450E
Name Height Composition Application
Slots 0 ~ 1 For SMUB 10U chassis 10U
Slots 2 ~ 15 For ADUB, ADUC or VDUB
Fan
module 1U 6 fans inside For system cooling
Air deflector
frame 2U Slant spacer
inside Air ducts (inlet from the front and
outlet from the rear)