Sagem 4450E - Manual (Page 119)

SAGEM 3P@C
3P@C Installation Manual
Page 7-4 Reproduction and communication in any form prohibited without the written permission of SAGEM SA
Serial
No. Item Description
5 c Change the current download configuration parameter
(user name and password)
6 a Download the system image file (program file of system
control board) to 3P@C 4450E
7 A Download the system image file (program file of system
control board) to 3P@C 4450E, and reboot the system
8 s Download the configuration file
9 fa Download the ADU FPGA code
10 fv Download the VDU FPGA code
11 da Download the ADU chipset code
12 fa Download the VDU chipset code
13 remove
Download the file to Flash
14 remove
Delete the files in Flash
15 rename
Rename the files in Flash
16 erase fileinfo Delete all files in Flash
17 show flash Show the information of all files in Flash
18 x Exit from the current download mode
Step 4: Change relevant parameters of the network port
Select c , and press Enter to begin interactive setting.
Table 7-3 Relevant parameters downloaded by the network port of system control board
Item Default
value Description
boot device boot device name, which generally need
not be modified
processor number 0 Need not be set
host name : Need not be set
file name The name of the version file to be
upgraded. It needs to be modified as the
actual system file name.
hos_smu_v02r00b09d06.bin
inet on ethernet(e) The IP address assigned to the network
port of the system control board. It must
share the same network segment with
the IP address of the host of the FTP
server.
inet on backplane(b)
: Need not be set
host inet(h) The IP address of the host of the FTP
server. It must share the same network
segment with the IP address assigned to