Sagem 4450E - Manual (Page 126)

SAGEM 3P@C
3P@C Installation Manual
Page 7-11 Reproduction and communication in any form prohibited without the written permission of
SAGEM SA
prompt
For operation details, see section 7.1.3.
Step 6: Return to the main menu
After the file is transferred successfully, the above interface disappears. The system returns to the serial port
menu. Execute the command
x to return to the Bootrom main menu.
Step 6: Reboot the system
Execute the command r in the main menu to reboot the system.
1.1.1.54 Upgrade through FTP/Xmodem
After starting the equipment, you can upgrade the system control board through FTP or Xmodem. If the user has
separate system control board software, you can upgrade the master system control board separately. The
operation is similar to that of upgrading the system file as described in section 7.1.3, except that their file names
are different from each other. If the user upgrades the software of the master system control board through the
system file, follow the procedures below:
Step 1 Download the system software
For the downloading method, see section 7.1.3 “Upgrading the System
File”.
Step 2 When you upgrade the version of the system control board, the system file
is hos_smu_v02r00b09d06.bin, the address of the FTP server is 20.1.1.11,
the user name is hostfile, and the password is drv.
3P@C(config)# download ftp 3P@COS 20.1.1.11 hostfile drv
hos_smu_v02r00b09d06.bin
Trying to download file from ftp server, please wait...
3048756 bytes received.
Start saving 3P@COS image...
Done.
3P@C(config)# reboot
Start check image and config file, please wait...
--------------------------------------
Current version is V2.0 Release10.4.0.
System version will be V2.0 Release10.4.0 after reboot.
Config file latest saved on TUE JAN 02 06:31:25 CST 2001 .
--------------------------------------
Are you sure to reboot the whole system? [Y/N]
Step 3 After starting the equipment, check whether the upgrade is successful or
not.
############################################################
# #
# Welcome to 3P@COS. #
# #
# Press Return to connect and config this system. #
# #
############################################################