Several forbidden overhead cabling methods – Sagem 4450E User Manual
Page 104
SAGEM 3P@C
3P@C Installation Manual
Page 5-3 Reproduction and communication in any form prohibited without the written permission of
SAGEM SA
The following figure shows the parallel and crossed net spacing between Ethernet cable and other pipelines:
Figure 5-2 Parallel and crossed net spacing
H
L
Note
In certain sections, if the Ethernet cable is parallel with the
power cable or near interference sources such as
electromotor and transformer, and the minimum net spacing
between them cannot address requirements, you can use
steel tube or metal trough to shield the Ethernet cable.
5.4. Several Forbidden Overhead Cabling Methods
Because outdoor overhead cabling is easy to couple up lightning and damage equipments, it is forbidden to use
the outdoor overhead Ethernet cabling, especially use the following cabling methods directly without any
protection measures.
Figure 5-3 Direct overhead cabling between two buildings without any protection (1)
Figure 5-4 Direct overhead cabling between two buildings without any protection (2)
Figure 5-5 Direct overhead cabling between two buildings without any protection (3)