Sagem 4450E - Manual (Page 132)

SAGEM 3P@C
3P@C Installation Manual
Page 7-17 Reproduction and communication in any form prohibited without the written permission of
SAGEM SA
Tagged Ports :
Untagged Ports : 0:1 0:2 0:4
7.3.5. 7.3.5. 7.3.5. 7.3.5. Viewing FIB Table
Operation Guide
Execute the command
show fdb {[mac] }*1 {[vlan] [|<1-4095>]}*1
{[agingtime]}*1 {[permanent]}*1 {[port][ ]}*1 {[slot][<0-15>]}*1
to view the
FDB table. The table contains the information including: User MAC address, whether the MAC address of the
opposite router is learned or not, whether the port and Vlan Name are correct or not, and fdb aging time.
Reference index
The information of the FDB address table is showed as follows:
3P@C(config)# show fdb
----- Begin of Mac Address Table Information (all)-----
Total 1 mac address entry showed.
Mac address Port Vlan name Flags
------------------------------------------------------
00:04:93:40:47:06 <3:23> default Age
------------------ ---- -----------------------------
-------- End of Mac Address Table Information -------
prompt
The FDB entries to the CPU are not displayed.
7.3.6. 7.3.6. 7.3.6. 7.3.6. Viewing the ARP Table
Operation Guide
You can execute the command show arp {[|permanent]}*1 to see whether the ARP has learned the
MAC address of the corresponding IP.
Reference index
For example:
3P@C(config)# show arp
Begin to show arp table information
Physics Address Ip Address Type
Total 1 information (include dynamic and permanent)
00:01:02:28:49:06 20.1.1.2 dynamic
Total 1 information showed
End to show arp table information