Sagem 4450E - Manual (Page 129)

SAGEM 3P@C
3P@C Installation Manual
Page 7-14 Reproduction and communication in any form prohibited without the written permission of
SAGEM SA
3P@C(config)# upload ftp config-file 20.1.1.11 ftpuser 123 config.txt
Trying to upload file to ftp server, please wait...
Successfully finished uploading file.
Finished.
You've successfully uploaded config-file config.txt
3P@C(config)#
7.2.3. 7.2.3. 7.2.3. 7.2.3. Loading the Configuration File
If the user’s several devices with the same configuration need to be configured, you can edit the configuration
file of any of the devices offline in the prescribed format, and transfer the configuration file to the device through
the FTP server. To validate the new configuration file, you must reboot the device.
Configuration procedure:
Step 1 First enable the FTP server and set the user name and password. For
example, the user name is “ftpuser”, the password is “123”, and the
configuration file is named “config.txt”.
Step 2 Download the configuration file in 3P@C 4450E.
3P@C(config)#download ftp config-file 20.1.1.1 ftpuser 123 config.txt
Step 3 Reset the system
3P@C(config)# reboot
7.2.4. 7.2.4. 7.2.4. 7.2.4. Erasing the Configuration File
You can clear the configuration file by executing the command erase . After the configuration file is erased, the
equipment will use default configuration parameters for initialization upon next power-on. You need to erase the
configuration file under one of the circumstances below:
System upgrade
„ The configuration file is damaged.
„ A mistaken configuration file is loaded.
Configuration procedure:
Step 1 erase Erase the configuration file from
the storage media
7.3. 7.3. 7.3. 7.3. Querying the Maintenance Information
7.3.1. Querying the Current Software Version
Operation Guide
Execute the command show version [all|<0-15>] to show the version information of all/some cards in 3P@C
4450E.
Reference index
The version information of the system software must be correct. The software versions (3P@COS(tm) Version)
of all cards must be consistent with one another. The HardwareVersion and SerialNo. must be consistent with
those of the cards.