beautypg.com

Querying the vlan status, Sagem 3p@c – Sagem 4450E User Manual

Page 131

background image

SAGEM 3P@C

3P@C Installation Manual

Page 7-16

Reproduction and communication in any form prohibited without the written permission of

SAGEM SA

DS Rate(Kbps) : 7584 US Rate(Kbps) : 1024

DS NoiseMargin(dB) : 12.00 US NoiseMargin(dB) : 8.00

DS Interleaved Delay(ms) : 16 US Interleaved Delay(ms) : 8

DS Attenuation(dB) : 1.50 US Attenuation(dB) : 0.00

DS Out Power(dB) : 7.70 US Out power(dB) : 12.40

DS Attainable Rate(Kbps) : 10544 US Attainable Rate(Kbps) : 1157

The parameters are described as follows:

„

Link state: Whether the port is in linked (up or down).

„

Port state: Whether the port is enabled or not. If the port is in the Disable state, the Link state
must be down.

„

Port Default VLAN ID: By default, each port belongs to the VLAN created by a system to
isolate the ports. This item indicates the ID of the VLAN where the port is located.

„

Port VLAN name: Name of the VLAN where the port is located

„

Remote modem connection: Whether the port is connected with a PC through a modem

„

Service Mode: Port working mode

„

Channel Mode: Channel mode

„

DS Rate(Kbps): Downstream rate (Kbps)

„

US Rate(Kbps): Upstream rate (Kbps)

„

DS NoiseMargin(dB):

„

US NoiseMargin(dB): Upstream noise margin

„

DS Interleaved Delay(ms): Downstream interleaved delay (ms)

„

US Interleaved Delay(ms): Upstream interleaved delay (ms)

„

DS Attenuation(dB): Downstream attenuation (dB)

„

US Attenuation(dB): Upstream attenuation (dB)

„

DS Out Power(dB): Downstream output power (dB)

„

US Out power(dB): Upstream output power (dB)

„

DS Attainable Rate(Kbps): Downstream attainable rate (Kbps)

„

US Attainable Rate(Kbps): Upstream attainable rate (Kbps)

7.3.4. Querying the VLAN Status

Operation Guide

Execute the command show vlan {}*1 to the status of a specified VLAN or all VLANs, including
Up/Down state, and the relationship of the port members in the VLAN (Tagged/Untagged).

Reference index

The Up/Down state of the VLAN is normal, and the relationship of the port members in the VLAN
(Tagged/Untagged) is consistent with that in the configuration.

For example, query the VLAN default configuration information:

3P@C(config)# show vlan default

VLAN ID: 2047

Vlan Name : Default

Vlan Type : Normal

Mac address : 00:05:3b:48:08:a6