Sagem 4450E - Manual (Page 23)

SAGEM 3P@C
3P@C Installation Manual
Page 1-4 Reproduction and communication in any form prohibited without the written permission of SAGEM SA
Physical performance 3P@C 4450E
Uplink ports 100M electrical and optical interfaces, gigabit optical interfaces
and ATM interfaces. All optical interfaces support single-mode
and multi-mode interface types, and the 100M optical interfaces
support the Trunk function
Port
configuration
Service ports VDSL and ADSL ports
Slot 16, among which, 2 SMUB slots and 14 service board/card slots
Hot plug Supported
Hot backup Redundancy hot backup for core parts Error
tolerance
design
CPU detection CPU detection
Negotiation function Full-duplex auto-negotiation
Packet transfer rate
( L2/L3) Wire speed
Basic
performance
Forwarding mode Store-and-forwarding
Port status Communication status and LINK status
Status
indication
Universal status Power status, system status & hot-swap display
10/100Base-TX 100 meters Categories-3/4/5 shielded/unshielded twisted pairs
100Base-FX 62.5/125µm multi-mode fiber (max. 2km), 9µm single-mode fiber
(max. 15km)
1000Base-SX 62.5/125 µm multi-mode fiber (max. 275m), 50/125 µm multi-
mode fiber (max. 550m)
Max. cable
length
1000Base-LX 9µm single-mode fiber (max.10km)
Electromagnetic compatibility EMS feature: Complying with the standards of EN 55024 , ETSI
EN 300 386, CISPR 24, GB/T 17626, GB/T 17618 and IEC
61000-4
Security specifications Complying with the standards of EN 60950, UL 60950,
CAN/CSA-C22.2 NO. 60950, GB 4943, IEC 60950, and AS/NZS
60950
100Base-FX
interface SC
1000Base-SX
interface SC
1000Base-LX
interface SC
DS-A155MM (155M
multi-mode ATM)
interface SC
DS-A155SM (155M
single-mode ATM)
interface SC
Console interface RJ-45
Interface type
10/100Base-TX
interface RJ-45
This page intentionally left blank