Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 92)

Step by Step
Customizing the Telephone
92
Language
Use this menu option to define the language for opera-
tor prompting.
Prerequisite: You are in the "Configuration" menu
page 91.
> : Select and confirm; the set language is displayed.
> :
Select language and confirm.
Date/Time
This function allows you to select one of three different
display modes for the date and manually set the time of
day.
Selecting the Display Mode
The currently configured format is shown on the display
as the first option.
The following display modes are available:
Prerequisite: You are in the "Configuration" menu
page 91.
> : Select and confirm.
> : Select required display format and confirm.
02=Language? >
1=German? >
If an optiPoint display module is connected, you
are asked to Restart the telephone after a
change of language so that the change of lan-
guage setting can also be done for the optiPoint
display module.
If the telephone goes back to idle mode without a
confirmation of the Restart, the message "Restart
required" blinks on the display and you have to Re-
start the telephone manually ( page 130).
You must manually set the date and time of day
if your telephone is not connected to an SNTP
server.
Option Example
1=DD.MM.YY 22.05.03
2=YY-MM-DD 03-05-22
3=MM/DD/YY 05/22/03
03=Date/time? >
1=DD.MM.YY? >