Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 25)

Operating the Telephone with the Display
25
Step by Step
Answering a Call Without the Headset
(Speakerphone Mode)
The telephone rings. The caller is displayed on the
screen.
:
Confirm
or
Press key. LED lights up.
Speakerphone mode.
u
or
v
Adjust volume. To raise or lower the volume, keep
pressing the keys until the desired volume is set.
Notes on speakerphone mode:
• Tell the other party that you are using speakerphone
mode.
• The speakerphone works bests at a low receiving
volume.
• The ideal distance between the user and the tele-
phone set in speakerphone mode is about 50 cm
(approx. 20 inches).
• If the other party cannot hear you, please check with
your service personnel whether your microphone
was deactivated via the configuration settings.
Answer call? >
Loudspeaker
On multiline telephones, the line being signalled
is automatically selected when you lift the hand-
set. If more than one line is alerting, you are con-
nected to the line that has been ringing the long-
est.
If you want to override the automatic selection,
press the applicable line key before you go off-
hook.
During secure voice transmission a lock symbol
is displayed on the phone (also see page 23)