Logging on and off at the same telephone, Logging on at the telephone, Logging on using the key – Siemens HIPATH 8000 OPTIPOINT410 User Manual
Page 86: Logging on using the menu, Y user
Step by Step
DLS Mobility Function
86
Logging on and off at the Same
Telephone
Logging on at the Telephone
No other mobility user is logged on.
Logging on using the key
One of the function keays was set up as logon key for
the mobility function.
Press the "Mobility" logon key. You are asked to enter
your "Mobility ID".
or
Logging on using the menu
>
:
Select and confirm.
:
Confirm to start the logon procedure.
o
Enter your Mobility ID (in general, this is the same as
your official telephone number).
o
Enter your User password (default value: "000000").
The following messages appear on the display:
• "Mobility logon: Validating request"
• "Mobility logon: Registering..."
• "Downloading user data"
When the logon procedure is completed, the LED of
the "Mobility" key is on, and MOB is shown on the dis-
play. If you press the "Mobility" key again, you are
logged off (
page 87). If an optiPoint display module is
connected, a tent-like symbol is diplayed in the top sym-
bol bar (
Mobility
11=Mobility?
>
1=Log on?
>
If an optiPoint display module is connected and
you use a different language setting as "mobility
user", you are asked to Restart
telephone so that the change of language setting
can also be done for the optiPoint display mod-
ule.