Beep on auto reconnect, Idle state options, Inactivity timeout – Siemens HIPATH 8000 OPTIPOINT410 User Manual
Page 104
Step by Step
Customizing the Telephone
104
Beep on Auto Reconnect
You can use this option to specify whether you will hear
a beep when a call is automatically reconnected.
Prerequisite: You are in the "Configuration" menu
>
:
Select and confirm.
:
Confirm. The new setting is displayed.
Idle State Options
System messages are displayed in the fourth line of the
optiPoint 410/420 advance S V7.0.
Prerequisite: You are in the "Configuration" menu
>
:
Select and confirm.
:
Confirm. If multiple messages are received, they are
displayed alternately.
or
>
:
Select and confirm. The message with the highest pri-
ority is displayed even if multiple messages have been
received. If there are several messages, a plus sign is
visible behind the current message. You can switch be-
tween messages using the plus/minus key.
Inactivity Timeout
Use the timeout setting to specify the period of inactiv-
ity after which the telephone will automatically revert to
the idle state.
Prerequisite: You are in the "Configuration" menu
>
:
Select and confirm.
:
Confirm.
or
>
:
Select and confirm.
or
>
:
Select and confirm.
35=Auto Reconnect Beep?>
Switch on?
>
36=Idle display static?
>
1=Cycle/Flash?
>
2=Static?
>
38=Inactivity timeout?
>
1=No timeout?
>
2=30 seconds?
>
3=1 minute?
>