Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 69)

Operating the Telephone with the Display
69
Step by Step
Advanced Cancel Key Function
For multiline telephones, the Cancel key function ap-
plies to the relevant active connection.
Generally when the Cancel key is pressed, the call be-
ing conducted by the party is terminated. With the ex-
ception of the situations described below, the relevant
line then becomes free.
• In consultation hold: the party is reconnected with
the original party.
• When using the handset: the user hears the dial
tone.
The following then applies:
• In the case of a simple connection between two par-
ties: if one of the parties presses the Cancel key,
the connection is terminated and the line reverts to
idle state (on-hook) and the dial tone is heard (off-
hook).
• If a holding party whose call has been put on hold
presses Cancel, the call on hold is terminated and
the line reverts to idle state (on-hook) and the dial
tone is heard (off-hook).
• If a party that is calling another party, presses Can-
cel during the course of the outgoing call, the outgo-
ing call is terminated and the line reverts to idle
state (on-hook) and the dial tone is heard (off-hook).
• If a party presses Cancel during call waiting, the call
is terminated and the line reverts to idle state (on-
hook) and the dial tone is heard (off-hook).
An incoming call cannot be refused by pressing
the Cancel key.