Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 79)

HiPath 8000 Functions
79
Step by Step
For Rejecting Calls
Comparably to selectively accepting calls, you can cre-
ate a screening list for calls you want to accept incom-
ing calls. The administrator knows how extensive this
list may be in the HiPath 8000 that you are operating on
site.
If a caller’s number matches one of the numbers in the
screening list, the call is not put through and the caller
is informed by an announcement that the called party
does not accept calls from this number. If the caller’s
number is not listed, the call is transferred to you as nor-
mal.
n Lift the handset.
o
Enter the code, e.g. *60 (consult the administrator).
You hear announcements that provide the following in-
formation:
• The name of the service (selective call rejection)
• Its current status (active or inactive)
• The current size of your screening list
After you hear those announcements, you hear
prompts that guide you to:
• Add entries to the screening list
• Delete entries from the screening list
• Review the screening list
• Activate or deactivate the feature
On multiline telephones, call rejection is available
for the prime line only.