Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 44)

Step by Step
Operating the Telephone with the Display
44
Checking Forwarding Status
The three types of call forwarding can have the follow-
ing states:
• Not programmed
• Not active
• Active
To check the current state, scroll to the Forward menu.
You will find an overview of the options here from
page 228.
> : Select and confirm. The status is displayed.
: Confirm.
or
> : Select and confirm.
or
> : Select and confirm.
The following messages may appear:
• "Not set"
– not programmed
• "Not active"
– programmed, but deactivated page 45
• "Active"
– programmed and activated page 45
Activating/Deactivating Call Forwarding
Prerequisite: A forwarding destination is programmed
( page 45).
Switch off call forwarding
> : Select and confirm. "Active" displayed.
: Confirm (or select and confirm "2=On no reply" or
"3=On busy").
> :
Select and confirm. Forwarding is "Not active".
03=Forward? >
1=Unconditional? >
2=On no reply? >
3=On busy? >
03=Forward? >
1=Unconditional? >
2=Switch off? >