Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 197)

Operating the Telephone with the optiPoint display module
197
Step by Step
Status Message for Multiple Lines
Display of Line Information for a Ringing Line Dur-
ing a Call
Prerequisite: The Show interline state function must
be activated (see page 107).
If more than one line is required for line status messag-
es, the following rules apply for the display:
• The lines are combined according to status and, de-
pending on priority, are displayed in accordance with
the rules described on page 182.
• Each status that applies to a line is represented sole-
ly by the status icon ( page 183) .
• Each status that applies to more than one line is rep-
resented by both the appropriate status icon
( page 183) and the number of lines for this sta-
tus.
In the above example, two lines are ringing (including
the one currently displayed); lines with lower priority
status are only displayed if the calls are answered (by
another telephone) or cleared down.
You can answer the ringing line currently being dis-
played or switch to line overview mode and select a dif-
ferent line that is in call waiting mode, ringing or on hold.
Secretary
Mon 07/03/05 11:34AM
00:24
Bill Smith
987654321
Jill Hill
2
Manager
Consult/Transfer