Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 45)

Operating the Telephone with the Display
45
Step by Step
Activate call forwarding
> :
Select and confirm. "Not active" is displayed.
: Confirm (or select and confirm "2=On no reply" or
"3=On busy").
> : Select and confirm. Forwarding is "Active".
Programming Call Forwarding
If you select a forwarding function that is not pro-
grammed, the "New/change target" menu option auto-
matically appears, which permits you to specify a desti-
nation address. Currently active or not active forwards
can also have their destination addresses changed. To
do this you must change default menu option "Switch
on" or "Switch off" to "New/change target" using the ar-
row keys. These scenarios are described below. Note
the "Cancel" function key can be used at any time to re-
vert to the previous level.
Specify and activate forwarding destination
> : Select and confirm. "Not active" is displayed.
:
Confirm (or select and confirm "2=On no reply" or
"3=On busy"). "Not set" is displayed.
: Confirm
: Confirm "1=Use keypad" to enter numeric values only
(or select and confirm "2=Use editor" to enter alphanu-
meric text).
o Enter the destination telephone number. Delete exist-
ing numbers by means of the < key, if necessary.
: If complete, confirm the entry. The forward is set and
active.
03=Forward? >
1=Unconditional? >
3=Switch on? >
03=Forward? >
1=Unconditional? >
1=New/change target? >
1=Use keypad? >
Complete? >
If unconditional call deflection is active in the idle
state, the fourth line of the display toggles be-
tween Menu and the programmed forwarding
destination, such as ">01928005".