Using auto dial timer – Siemens HIPATH 8000 OPTIPOINT410 User Manual

Page 53

Operating the Telephone with the Display

Step by Step

Using Auto Dial Timer

Following expiry of a configurable delay interval, auto di-

aling occurs after the last dialed digit is entered. This

can happen in the following circumstances:

• Dialing in idle mode

• Deflecting an incoming call

• Making a consultation call

• Transferring an answered call.

The delay time can be shortened as follows:

• Pressing the

key. This is applicable in all scenari-

os.

• Lifting the handset. This is only applicable after pre-

dialing when the phone is idle or if the user has en-

tered the digits for a consultation call and the hand-

set is on hook.

• Pressing the Loudspeaker key. This is only applica-

ble after pre-dialing when the phone is idle and the

loudspeaker LED is off or if the user has entered the

digits for a consultation call and the loudspeaker

LED is off.

If an emergency number has been programmed

by the administrator, the delay time for this num-

ber is reduced to 1 second.

The default setting for the delay time is 6 sec-

onds. If necessary, you can change this value

The automatic dialing delay does not function if

you are using a dial plan and have set Hot-Key-

pad (see

page 109). Dialing takes place auto-

matically as soon as the character string entered

matches an entry in the dialing plan.

This manual is related to the following products: