Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 131)

Operating the Telephone with the optiPoint display module
131
Step by Step
Operating the Telephone with the
optiPoint display module
Using the Display
To select the control elements on the display, use the
stylus provided or a similar object that will not damage
the display surface.
Please read the instructions on page 203.
Call View Start Display
Prerequisite: "Use DSM" is enabled ( page 105) and
the telephone is not locked ( page 115).
When you connect the telephone for the first time or re-
start it a message appears prompting you to press the
display to start Call Control. The idle display appears.
Press the Menu icon to see which menu options are
available when the telephone is in the idle state.
Product support for the optiPoint display module
by Siemens Service was discontinued at the end
of 2006.
Call Control
Mon 07/03/05 11:34AM
+44 123456 78910
Redial Last No.
Group Pickup
Forward Calls
Do not disturb
Cancel Callbacks
Ringer on
Setup
Call Log
Contacts