Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 182)

Step by Step
Operating the Telephone with the optiPoint display module
182
Rules for Selecting a Preferred Line
• If there are calls on multiple lines – up to 10 lines
possible – (ringer or call waiting signal), the Start dis-
play shows the line with the highest priority in accor-
dance with the preset terminal line preference.
• As soon as the terminal line with the highest priority
is seized (call answered from another phone), the
next terminal line (where a call is ringing/waiting the
longest) is displayed.
• If there are no incoming calls, the Start display
shows the line with the highest priority in accor-
dance with the lines preferred by the administrator
for outgoing calls.
• If the line for outgoing calls with the highest priority
is busy (in use by another telephone), the next avail-
able line for outgoing calls is displayed.
• If all available lines for outgoing calls are busy, the
line overview is displayed.
• If no preferences have been defined, the line over-
view is displayed.
A configured line is only displayed in the line
overview if the display for this line is
activated page 107. Display is activated by
default.
You cannot use the Direct Station Select key
( page 70) if the optiPoint display module is in
call control view. The Direct Station Select key
line is also not displayed in the Line Overview
( page 183).