Function selection, Incoming calls, Answering a call with the handset – Siemens HIPATH 8000 OPTIPOINT410 User Manual

Page 24: Function selection incoming calls

Step by Step

Operating the Telephone with the Display

Function Selection

A function is selected with the keys

and con-

firmed with the

key. The arrow icon (>) in the fourth

line indicates that additional functions are available. In

idle mode, there are no menu options available (no

prompt).

At the end of the menu list the

key goes to the be-

ginning of the list, and at the beginning of the list the

key goes to the end of the list.

When you select a function using the

key, you are led

step by step through the call procedure until all param-

eters have been entered.

Incoming Calls

The optiPoint 410/420 advance S V7.0 rings giving the

set call signal

If calling party information (name, number, or both) is

transferred, it appears in the display.

If no information is transmitted, you will see "Private“ or

"Unknown" on the phone’s display.

Answering a Call With the Handset

The telephone rings. The caller is displayed on the

screen.

Lift the handset.

Set call volume. To raise or lower the volume, press the

relevant key until the desired volume is set.

If you are defining settings on the telephone

when a call arrives, the process is paused. After

the telephone conversation, the telephone auto-

matically returns you to the point in the menu

structure you were in before the call.

Refer to

page 60 for information to answer in-

coming pickup group calls.

This manual is related to the following products: