Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 235)

Appendix
235
Line Key Status Indication
Direct Station Select key Status Indication
LED Line status Description
OFF Idle No connected calls.
BLINKING
RAPIDLY
Call waiting mode. A new incoming call/possible callback is wait-
ing. (1)or (2)
FLICKERING Held. A call held in a queue that can be answered
by the multiline telephone.
BLINKING
SLOWLY
Idle (forwarded) The line is forwarded immediately (prime line
only) (3)
BLINKS
SLOWLY
Idle (forwarded) A secondary line is forwarded immediately
(HiPath 8000 forwarding)
(4)
ON Busy (local) (5) The line is seized by a connection to the mul-
tiline telephone.
Busy (remote station) (4) The line is seized by a connection to another
multiline telephone.
FLICKERING
WEAKLY
All The line appears on the display, i. e. it is busy.
(1) In the case of a line for which a call is waiting, call waiting mode is maintained so that in-
formation on the waiting call remains displayed.
(2) A call may already be connected to the line for which a new call is waiting. This is referred
to as "Call Waiting". The connection can be active or held
(3) The LED indicator on the prime line key indicates immediate forwarding instead of an idle
line.
(4) Only if activated by administrator.
(5) An active call is connected to the multiline telephone. A call is connected to the other tele-
phone.
LED Line status Description
OFF Idle The line assigned is not used.
ON Busy The main line of the target telephone is busy.
BLINKING Incoming call An incoming call is waiting on the main line of
the target telephone.