Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 59)

Operating the Telephone with the Display
59
Step by Step
Using a Key to Activate/Deactivate Do Not
Disturb
Prerequisite: A function key must be configured (see
page 117).
Press the "Do Not Disturb" key.
The LED is on.
If there is an incoming call, the caller will receive busy
treatment (tone or announcement), depending on the
system setup. However, calls for pickup groups will still
be put through.
The Do Not Disturb LED blinks.
To deactivate the function, press the "Do Not Disturb"
key again.
The LED goes out.
Do Not Disturb
This setting remains in effect as long as the LED
is on.
Do Not Disturb
Do Not Disturb
Do Not Disturb can also be switched on or off by
pressing the Do Not Disturb key during a call.