Line settings, Showing line status in call information box – Siemens HIPATH 8000 OPTIPOINT410 User Manual
Page 107
Customizing the Telephone
107
Step by Step
Line Settings
This option can only be selected if line keys have been
configured (multiline).
Prerequisite: You are in the "Configuration" menu
>
:
Select and confirm. The name of the first line is dis-
played.
>
:
Select the lined to be configured.
Activate/Deactivate "Show in Overview"
for Multiline Display Module
Specify here whether or not the individual line should
be shown in the multiline overview display module
>
:
Select and confirm.
:
Confirm. The line appears in the overview.
or
:
Confirm. Line display is suppressed.
The new setting is displayed.
Position of Line in Multiline Overview Display
Module
Specify the position of the selected line in the multiline
overview display module (
>
:
Select and confirm.
o:
Enter the required value for the position and confirm
your entry.
The set position is displayed.
Showing Line Status in Call Information Box
Specify here whether or not the selected line’s status
should be shown in a call information box in the
optiPoint display module call view.
>
:
Select and confirm.
44=Line settings?
>
02=1234567890?
>
1=Show in overview?
>
Switch on?
>
Switch off?
>
2=Position in overview? >
3=Show interline state? >