Resetting ringer settings, For all lines, For a specific line – Siemens HIPATH 8000 OPTIPOINT410 User Manual
Page 127: Handset volume, Resetting ringer settings handset volume
Customizing the Telephone
127
Step by Step
Resetting Ringer Settings
In case of a MultiLine telephone you can reset the rin-
ger (tone sequence and melody) and volume to the fac-
tory default either individually or for all lines set up.
Prerequisite: You are in the "Audio Settings" menu
>
:
Select and confirm.
For all Lines
:
Confirm. All settings are reset.
For a Specific Line
Prerequisite: You have previously selected a setting
different from the factory default for this line.
>
:
Select and confirm.
Press the desired line key. The number or name of the
line and the current setting are displayed.
>
:
Select and confirm. The setting is reset to the factory
default.
Handset Volume
You can adjust the handset volume as follows:
Prerequisite: You are in the "Audio Settings"
>
:
Select and confirm. The current setting is displayed.
The value can be increased or reduced by using either
uv
the control keys on the telephone or
<>
the arrow keys or
o
e
to
l
the keypad keys.
:
Confirm the setting. The new setting is displayed as a
value.
10=Line Specific Ringer? >
!=Reset All?
>
2=Change?
>
3=Reset?
>
05=Handset vol.?
>
>