Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 49)

Operating the Telephone with the Display
49
Step by Step
Conferencing
This feature is sometimes known as three-way calling.
Prerequisite: You are conducting a consultation call
( page 47).
Introducing the Conference
Prerequisite: You are conducting a consultation call
( page 47).
> : Select and confirm. The following appears in the dis-
play: "Creating local Conf. "
"In Conference" appears on the display.
Ending the Conference
Changing back to single-line calls
> : Confirm.
You are reconnected with the first party. The second
party is placed on hold. You can now:
• alternate between the two parties;
• connect the two other parties (transfer);
• re-enter the conference call;
• terminate the active call – you are connected to the
second party.
Create local Conf.? >
If you were on a secure call and you initiate a con-
sultation call, the current call is put on hold. The
new call from the consultation call can be secure
or unsecure. If call three parties then enter a con-
ference call, the initial connection remains secu-
re. As soon as the connection to one partner is
not secure, the entire conference is not secure.
(see also page 23)
Local Conf. disconnect? >