Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 37)

Operating the Telephone with the Display
37
Step by Step
Reachability
If you want to be reachable within the building or on the
premises, you can temporarily forward all calls to your
main telephone to a "guest telephone" specifically set
up for this purpose.
You can use all HiPath 8000 features set up for your
main telephone and available for HotDesking on the
guest telephone. In case of outbound calls your main
phone number is transferred. The local settings of the
guest telephone (e.g. key assignment) are maintained.
Registering at the guest telephone
Precondition: The guest telephone is available and in
ready mode.
Press the key "HotDesking" on the guest telephone
(must be set up page 212).
You are asked to enter your user ID (the user ID is usu-
ally the number of your main telephone).
o : Enter and confirm the user ID to be used for registering.
You are asked to enter your PIN.
o : Enter and confirm your PIN.
A tone signal confirms that HotDesking is activated for
your user ID. The HotDesking key lights up. The display
shows your main telephone number with the prefix
"HD" (e.g. HD561923497).
All calls for your main telephone are now fowarded to
the guest telephone.
De-registering at the guest telephone
Press the key "HotDesking" at the guest telephone. A
tone signal confirms that HotDesking is deactivated.
HotDesking
HotDesking