Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 207)

Web Interface
207
Preparatory Steps
Open Web Interface
Precondition: The web interface must be activated.
To evoke the interface, open a web browser and enter the following URL:
http://[IP of the telephone]
Where [IP of the telephone] stands for the IP address of the optiPoint 410/
420 advance S V7.0 that you want to map.
A host name has been assigned to your telephone; you can evoke the web
interface using this host name in the browser. Please check the name with
your service personnel. You can then access the web interface for your
telephone e.g. in the following format:
https://hostname.domainname
If applicable, confirm the following advisory message with "Yes":
The homepage appears: