Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 72)

Step by Step
HiPath 8000 Functions
72
Using Call Forwarding
This section describes the call forwarding functions
supported by the HiPath 8000. These functions can be
called up using the feature code. You can also assign a
frequently used function to a programmable key or a se-
lected repdial key.
Call Forwarding - Busy Line
The HiPath 8000 function Call Forwarding - Busy Line
(CFBL) allows you to enter a feature code to forward
calls when your line is busy. The administrator specifies
the forwarding destination.
Switch on
n Lift the handset.
o To activate forwarding, enter the code, e.g. *90 (consult
the administrator) or the code and a number
e.g. *901234567. You will hear a confirmation tone.
Switch off
n Lift the handset.
o To deactivate forwarding, enter the code, e.g. *91 (con-
sult the administrator). You will hear a confirmation
tone.
You should not use the phone-based call for-
warding function together with the
HiPath 8000 call forwarding function.