Siemens HIPATH 8000 OPTIPOINT410 User Manual
Page 122
Step by Step
Customizing the Telephone
122
o :
Enter or modify name or number and confirm. The rele-
vant key is labelled automatically.
or
>
:
Select and confirm to keep the existing label.
The phone is now ready to dial with this function key in
the programmed level.
If you want to program another key (or key level of the
same key), you can select the level again.
For programming the second level:
>
:
Confirm. You are prompted to press a key.
Press the function key to be programmed (the associat-
ed LED blinks).
:
Confirm.
>
:
Select and confirm.
or
>
:
Select and confirm.
o :
Enter the telephone number or name to be stored and
confirm.
When programming function keys on an
optiPoint 420 advance S V7.0 or
optiPoint self labeling key module the electronic la-
beling function Label is displayed with the following
prompt:
:
Confirm to adapt the electronic key labeling.
o :
Enter or modify name or number and confirm. The rele-
vant key is labelled automatically.
or
>
:
Select and confirm to keep the existing label.
Continue?
>
If you are using an optiPoint 410 advance S V7.0
write the function that you have assigned to the
key on the label card to identify it
2=Shifted keys?
>
On the second level, only phone numbers and
names, including repertory dialing can be pro-
grammed.
02=Selected dialing?
>
Program destination #? >
Program dest. Name?
>
Change?
Continue?
>