Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 58)

Step by Step
Operating the Telephone with the Display
58
Deactivating the Ringer
If you do not want to be disturbed by an incoming call
ringing, you can deactivate the ringer.
Prerequisite: A function key must be configured (see
page 117).
Press the "Ringer off" key.
The LED is on.
If there’s an incoming call, the ringer sounds one time
and then remains mute.
The "Ringer off" LED blinks.
To deactivate the function, press the "Ringer off" key
again.
The LED goes out.
Activating Do Not Disturb
Another way of avoiding disruptive incoming calls is to
activate the Do Not Disturb function. When this func-
tion is activated, your telephone will not ring for incom-
ing calls. The caller will receive busy treatment (tone or
announcement), depending on the system setup.
Prerequisite: Do Not Disturb must be permitted, other-
wise the menu option will not be available (see
page 101).
Activating/Deactivating Do Not Disturb
> :
Select and confirm.
: Confirm. The new setting is displayed.
or
:
Confirm. The new setting is displayed.
If the word "or" is blinking in the idle display, the mes-
sage "Do not Disturb - set" is displayed.
Ringer off
This setting remains in effect as long as the LED
is on.
Ringer off
Ringer off
If you have a multiline telephone, this function is
only available for the prime line.
04=Do Not Disturb? >
Switch on? >
Switch off? >