Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 74)

Step by Step
HiPath 8000 Functions
74
The HiPath 8000 rings the telephone to which you want
to forward your calls.
w • If the party answers, you can notify the party that
your calls are being forwarded.
• If the forwarded-to party does not answer or is busy,
repeat the activation procedure. As long as you do
so within two minutes, you hear the confirmation
tone followed by dial tone. The HiPath 8000 does
not attempt to alert the party at the forwarding des-
tination that the feature has been reactivated.
While unconditional call forwarding is activated, calls
forwarded while the line is in idle state are signaled by
a brief ring on the phone to which they are forwarded
(approx. 0.5 seconds). This serves as a reminder that
this particular feature is activated.
Switch off call forwarding
n
Lift the handset.
o Enter the code, e. g. *73 (consult the administrator) to
switch unconditional call forwarding off.