Logging off at the telephone, Y user – Siemens HIPATH 8000 OPTIPOINT410 User Manual
Page 87
DLS Mobility Function
87
Step by Step
Logging off at the Telephone
Prerequisite: You are logged on as a mobility user.
If available, press the "Mobility" key. The logoff proce-
dure is started.
or
>
:
Select and confirm.
:
Confirm to start the logoff procedure.
o
If requested, enter your User password (default value:
"000000").
The following messages appear on the display:
• "Mobility logoff: Uploading user data"
• "Mobility logoff: Registering..."
• "Downloading user data" (base user)
As soon as the telephone has returned to the "base us-
er", MOB disappears from the display.
If the DLS server is not available in the LAN or an
incorrect server address was stored in the tele-
phone, your logon request is rejected with the
message "DLS Server not available". Please con-
tact your service personnel in this case.
11=Mobility?
>
2=Log off?
>
If you entered an incorrect User password, the
message "Logoff failed" is displayed until
• you entered the correct User password and
thus logged off successfully, or
• your service personnel cleared the message.
You can also log off using the web interface. For
this feature, please see the Chapte „Web
If an optiPoint display module is connected and
you use a different language setting as "base us-
telephone so that the change of language setting
can also be done for the optiPoint display mod-
ule.