Using a multiline setup, Incoming call (ringer or call waiting tone), Outgoing calls – Siemens HIPATH 8000 OPTIPOINT410 User Manual
Page 66: Off-hook dialing, On-hook dialing
Step by Step
Operating the Telephone with the Display
66
Using a Multiline Setup
Incoming Call (Ringer or Call Waiting Tone)
The optiPoint 410/420 advance S V7.0 rings with the set
ring tone
If information about the calling party is transferred
(name, number or both), it appears on the display.
n
You can now lift the handset and talk with the person
calling.
or
:
Confirm Answer call
and then lift the handset or use the
speakerphone.
or
Press the blinking line key before you lift the handset or
before using the speakerphone.
Outgoing Calls
Off-hook dialing
Initiate a call by:
• Pressing a free line key on the multiline telephone
• Pressing the Loudspeaker key
• Lifting the handset
On-hook dialing
You can start entering the number immediately. The
connection is established via the next available line.
On multiline telephones, the line being signaled
is automatically selected when you lift the hand-
set. If more than one line is alerting, you are con-
nected to the line that has been ringing the long-
est.
Answer call?
>
Line