In the maintain hosts window, select the new host, Configure the options as needed, B. click create and retrieve selected topologies – Sun Microsystems StorEdge 6900 Series User Manual
Page 75: C. click merge and push master topology, Conclusion, For internal use only
Chapter 5
Troubleshooting Host Devices
59
For Internal Use Only
7. Choose Maintenance -> General Maintenance -> Maintain Hosts.
Refer to Chapter 3, “Maintenance,” of the Storage Automated Diagnostic User’s Guide
for detailed instructions.
8. In the Maintain Hosts window, select the new host.
9. Configure the options as needed.
10. Choose Maintenance -> Topology Maintenance -> Topology Snapshot.
a. In the Topology Snapshot window, select the new host.
b. Click Create and Retrieve Selected Topologies.
c. Click Merge and Push Master Topology.
Conclusion
Any time a master, alternate master, or slave monitoring host is replaced, you must
recover the configuration using the procedures described above. This is especially
important when the Storage Service Processor is replaced as a FRU, whether the
Storage Service Processor is the master or the slave.