Sun Microsystems StorEdge 6900 Series - Manual (Page 100)

84 Sun StorEdge 3900 and 6900 Series Troubleshooting Guide — March 2002
For detailed information about the SUNWsecfg scripts, refer to the Sun StorEdge
3900 and 6900 Series Reference Manual.
▼ To Replace a Failed Virtualization Engine
1. Replace the old (failed) virtualization engine unit with a new unit.
2. Identify the MAC address of the new unit and replace the old MAC address with
the new one in the /etc/ethers file:
3. Verify that RARP is running on the Storage Service Processor.
4. Disable the switch port:
5. Power on the new unit.
6. Log in to the new unit, for example:
7. From the User Service Utility Menu, enter 9 to clear the SAN database.
8. Choose Quit to clear the SAN database.
9. Configure the new unit:
10. Check the configuration:
8:0:20:7d:82:9e virtualization engine-name
# /opt/SUNWsecfg/flib/setveport -v VE-name -d
# telnet v1a virtualization engine-name
# setupve -n virtualization engine-name
# checkve -n virtualization engine-name